Filling in the blanks

Hillgrade:

I should have made a post between the last one and the one before to show just what we did to get ready for The Lift.

The biggest job was the chimney in the kitchen. It used to be hooked to the wood range but it had to come down since it was leaning dangerously and would have prevented the house from lifting.

It didn't take us long, John and I, to make short work of it last week. John started on the roof and really only had to push it with his little finger to make it come tumbling down. He got it down to below the roof line and then patched the roof with some pink bubble wrap that we had tied around the stuff in our trailer last year when we came down.

Then we got to work on the portion that ran through the Chimney Room (hence the name of the room)[see leftmost picture]. John had a 4-pound sledge hammer (I grew up calling them mauls) for knocking the bricks. The bricks didn't take much coaxing to come loose. We opened the window in the room and threw the bricks out into the backyard.

Pretty soon we could see down into the kitchen, so we cleaned up the Chimney Room and took ourselves downstairs. We had a cup of tea and a little snack before continuing.

It pretty soon became clear that we would need masks for the remainder of the work. The chimney, just below where the stove pipe joined it, was pretty much FULL. Of what we were/are not sure. It was like gravel, but damp and dark [see below]. Probably a mixture of creosote, soot, dust and precipitation that fell through the chimney over the years. It stank. Acrid is a mild word for it.

We needed a tiny shovel to get this stuff out of the chimney before taking the bricks away. John remembered finding a wee shovel in the shed but it was falling apart. However, with a strategically positioned nail, bent at just the right angle, we managed to get a workable shovel.

We were unable to open the window near the kitchen chimney without totally destroying it. So the bricks had to be walked out the door to the yard, two by two.

When we were finished, we were left with a concrete chimney block [at left]. This top of this block would originally have been at floor level, or perhaps just above. Proof of just how badly this house needs to be leveled.

The living room chimney services the furnace. It was originally the chimney for the parlour wood stove. In fact, the furnace pipe comes up through the floor and enters the chimney in the same spot that the stove used [see right]. This whole thing had been boxed in to hide it all, with shelves built around in an attempt to make it somewhat useful. But it took up a lot of space in the Living Room (parlor?) and I was all for getting rid of it.

Except. The chimney was rather nice seen from outside. Gave the house character. Completed the roof line. But not practical inside. What to do? What to do?

We debated long and hard about it. John did a lot of online research to see if our furnace could work with one of those metal chimneys attached to the outside of the house.

It seems that it would, but we decided to postpone this decision until later. Maybe next year. (Update 2023: Little did we know.)

And so. With the kitchen chimney down, we were truly ready for the lift. Bring it on.